SEL85F14GM (FE 1.4 / 85 GM) (FE 85mm F1.4 GM)
4-15E
7. Set the SSM height adjustment measurement jig on the Stator Screw Ring (9139).
SSM height adjustment measurement jig
SSM height adjustment jig
Fig. 4-9-3
8. Position the SSM height adjustment measurement jig to the center of height adjustment jig (cap), and adjust the Stator Screw Ring (9139) to satisfy
the adjustment value.
adjustment value: 3.5 ± 0.05 mm
9. After completing the adjustment, apply the adhesive bond (B-10) to the groove of Stator Screw Ring (9139) which is not concern to the groove
of Straight Fixed Barrel (9139).
OK
NG
Straight Fixed Barrel (9139)
Stator Screw Ring (9139)
Stator Screw Ring (9139)
Groove (4 locations)
Stator Screw Ring (9139)
Apply the adhesive
bond (B-10)
Fig. 4-9-4
