SEL85F14GM (FE 1.4 / 85 GM) (FE 85mm F1.4 GM)
4-3
(1) Setting of Equipments
Set the equipments and the lens to be tested as shown below.
4-1-3. Preparations for Equipments
Tripod
(optional)
AC
To tripod screw
USB cable
(1-829-868-41)
HASP key
To USB connector
Lens to
be tested
Camera
(ILCE-5000)
To USB connector
Lens to be tested
Lens to be tested
Personal computer
(The SeusEX must be installed in the PC.)
Windows Vista / 7
256 MB or more recommended (Windows 7)
1 GB or more recommended (Windows Vista)
USB 2.0 recommended (also compatible with 1.1)
Two connectors are required.
.NET Framework 2.0
(.NET Framework 2.0 is installed at lens adjustment
program installation, if it is not installed.)
OS:
RAM:
USB port:
Run time:
Within 10 mm
・
In the case of fixed focal lens
・
In the case of zoom lens
Within 10 mm
Flange back
adjustment jig
(J-6082-563-A)
FB Adjustment chart
or
Siemens star chart
(J-6080-875-A)
AC adaptor
(AC-PW20)
(1-487-963-12:EXCEPT US, CND)
(1-487-963-22:US, CND)
Flange back
adjustment jig
Flange back
adjustment jig
Fig. 4-1-3
A flange back adjustment jig and a flange back adjustment chart are necessary for the Flange Back (S) adjustment.
Enlarge the flange back adjustment chart to the specified size and print it fully on the paper.
Size specification: White width 10mm, black width 10mm
10 mm
10 mm
10 mm
FB Adjustment chart
The following settings of the printer allows printing that nearly meets the specification.
• Page enlargement/reduction: None
• Magnification: 200%
However, fine-adjust the rate of magnification before printing the chart because the magnification error varies with printer types.
