5-27
SEL1635GM
(2) Lens Device2 (S)
• Adjust the MR sensor of focus.
• Adjust the mechanical end of focus and zoom.
• Adjust the horizontally.
• Adjust the frequency of focus PWM.
Subject
Not required
Operation on Lens side
• Zooming ring
Type of the camera
ILCE-5000
Shooting Mode of the camera P mode (Program Auto)
Adjusting Method
1. Click the [Lens Device2 (S)] button in the Adjustment and In-
spection.
2. The START screen is displayed, after the preparation of adjust-
ment is completed, press the ENTER key.
3. Automatically starts the focus MR adjustment.
4. After the focus MR adjustment is completed, automatically starts
the mechanical end adjustment.
5. After the mechanical end adjustment is completed, message
screen is displayed in the following. Set the zooming ring to the
WIDE end (focal length: 16 mm).
Zooming ring
6. When the ENTER key is pressed, message screen is displayed
in the following. Set the zooming ring to the TELE end (focal
length: 35 mm).
Zooming ring
7. When the ENTER key is pressed, message screen is displayed
in the following. Check the lens is horizontal.
8. When the ENTER key is pressed, automatically starts the hori-
zontal adjustment.
9. After the horizontal adjustment is completed, automatically starts
the focus PWM adjustment.
10. “LENS DEVICE (PWM Frequency) ADJUSTMENT OK” is
displayed, press the ENTER key.
11. When the ENTER key is pressed, recording the adjustment data
and releasing from adjustment mode are performed automatically,
and “FINISHED” is displayed when the process is completed,
then click the [OK] button.
