1-2E
SEL1635GM
1-5. NOTE ON REPLACEMENT OF
MAIN BOARD
To replace the Main Board (CL-1052 board), connect the E-mount
lens to the ILCE-5000, and read/write of the adjustment data in the
following procedure.
• Before main board replacement
“Command” of E-Mount Lens Adjustment (Adjustment Applica-
tion for Service) is set to [READ] to implement the [Adjustment
Data Backup].
• After main board replacement
“Command” of E-Mount Lens Adjustment (Adjustment Appli-
cation for Service) is set to [WRITE(SAVE)] to implement the
[Adjustment Data Backup].