4-17
SAL50M28 (MACRO 2.8/50) (50mm F2.8 Macro)
4-6.
BRUSH POSITION CHECK/ADJUSTMENT AND PATTERN CHECK
Note:
If dialog box of error code appears during the checking or adjustment, check the reason of error referring to page 4-20.
4-6-1. Brush Position Check
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Lens Adjustment Program
Note:
Lens Adjustment Program is downloadable from the ESI homepage.
1. Preparations
1)
Connect the checking lens to the camera.
2)
Start the lens adjustment program “LensAdjustment.exe” referring to “4-1-2. Lens Adjustment Program”.
Fig. 4-6-1
2. Checking Method
1)
Check that the “Type” is set to “1”, and click the
[Connect]
button on the lens adjustment program.
Note:
Click the
[End]
button to disconnect the USB connection, then lens adjustment program will terminate.
Fig. 4-6-2
2)
Check that the “Type” is set to “1”, and click the
[Focus]
button on the lens adjustment program.
3)
Set the focus position to infinity end, then check that the OK (Green) indicator of “Position” lights as shown in Fig. 4-6-3.
Fig. 4-6-3
If the NG (Red) indicator of “Position” lights, perform the “4-6-2. Brush Position Adjustment and Pattern Check”.
Fig. 4-6-4
4)
Click the
[Exit]
button.
5)
Click the
[End]
button to terminate the lens adjustment program.
6)
Turn the POWER switch of the camera to OFF.
