manualshive.com logo in svg

Sony SAL50M28 - 50mm f/2.8 Macro Lens, Service Manual

Share
Download
Sony SAL50M28 - 50mm f/2.8 Macro Lens Service Manual Download Page 25

HELP

SAL50M28 (MACRO 2.8/50) (50mm F2.8 Macro)

HELP22

Grease (G-35):

J-6082-621-A

Adhesive bond (B-40): J-6082-614-A

Apply the grease (G-35) to the instruction part as shown in the figure and apply the adhesive bond (B-40) to the three screws.

HELP23

Grease (G-85):

J-6082-626-A

Grease (G-15):

J-6082-619-A

Anti-diffusion agent (A-20): J-6082-611-A

1.

Apply the grease (G-85) to the gear teeth, grease (G-15) to the cam groove, and the anti-diffusion agent (A-20) to the instruction parts

of the focus ring.

2.

Apply the grease (G-15) to the cam groove and the anti-diffusion agent (A-20) all round to the shaded area of the fixed barrel as

shown in the figure.

Apply the grease (G-35)

Apply the
adhesive
bond (B-40)

Fixed Barrel Unit

Focus Guide

Apply the adhesive bond (B-40)

Apply the grease (G-85) (Gear portion)

Apply the grease (G-15) (Cam groove portion)

Apply the grease (G-15) (Cam groove portion)

Apply the
anti-diffusion agent
(A-20) (All circumference)

Apply the anti-diffusion
agent(A-20) 
(All circumference)

Summary of Contents for SAL50M28 - 50mm f/2.8 Macro Lens


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands