11
OPERATION NOTES
A.
Before each flight, make sure the cables and mounting hardware
don’t
interfere with the
propellers.
B.
The
GeoSnap system, mounting hardware, and cabling adds a total of 346 grams to the drone’s
weight.
C.
The goal is to have one GeoSnap logging session per photogrammetry project. If you have to use
multiple sets of drone batteries to map your entire project, we recommend hot swapping the
drone
’s
batteries so the GeoSnap system remains powered on and logging during the swap(s).
D.
If for some reason you need to power-cycle the GeoSnap system while the drone is powered on,
you can do so by unplugging the red JST power connector and then plugging it back in.
E.
The GeoSnap system is intended to stay mounted on the Airpeak S1. To help facilitate this, all
mounting hardware was designed to fit in the box/foam packaging that the drone ships in when
the antenna mast is folded down.
