Sony RMT-V267B, Service Manual

Page: 6 / 91

1-1
SLV-999HF/M11HF/M91HF
SECTION 1
GENERAL
This section is extracted from instruction
manual. (SLV-M91HF model)
Basic Operations
4
Basic Operations
Playing a tape
1
Turn on your TV and set it to the video channel.
2
Insert a tape.
The VCR turns on and starts playing
automatically if you insert a tape with
its safety tab removed.
3
Press
H
PLAY.
When the tape reaches the end, it will rewind automatically.
Z
EJECT
X
PAUSE
H
PLAY
x
STOP
M
FF
m
REW
SMART CUE
CLEAR
DISPLAY
PLAY
5
Basic Operations
Basic Operations
Additional tasks
To Press
Stop play
x
STOP
Pause play
X
PAUSE
Resume play after pause
X
PAUSE or
H
PLAY
Fast-forward the tape
M
FF during stop
Rewind the tape
m
REW during stop
Eject the tape
Z
EJECT
To skip playback
You can skip a portion of playback you don’t want to watch such as a
commercial and restart playback by pressing a single button.
1
Press SMART CUE during playback of the scene you want to skip. The
VCR starts searching.
2
Press SMART CUE again when you find the scene you want to watch.
The VCR stops searching, rewinds a few seconds, then resumes normal
playback.
If you press and hold SMART CUE while the VCR is skip searching, the VCR
will stop searching, and continue rewinding until you release SMART CUE.
Tip
• You can change the length of rewinding time on the ADVANCED OPTIONS menu.
For details, see page 33.
To use the time counter
At the point on the tape that you want to find later, press CLEAR. The
counter in the display window resets to “0:00:00”. Search for the point
afterwards by referring to the counter.
To display the counter on the TV screen, press DISPLAY.
Notes
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but
the picture quality cannot be guaranteed.
• The counter resets to “0:00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
STEREO SAP LP SP EP VIDEO APC EDIT
VTR
1 2 3
AV INSERT BLANK
Basic Operations
6
1
Turn on your TV and set it to the video channel.
To record from a cable box, turn it on.
2
Insert a tape with its safety tab in place.
Recording TV
programs
SP/EP
INPUT
SELECT
CH +/–
z
REC
TV/VIDEO
COUNTER/
REMAIN
x
STOP
DISPLAY
Shuttle ring
Number
buttons,
ENTER
1 2 3
4 5 6
7 8 9
0
7
Basic Operations
Basic Operations
Recording indicator
continued
3
Press INPUT SELECT until a channel number appears in the display
window.
4
Press CH +/– to select the channel you want to record.
5
Press SP/EP to select the tape speed, SP or EP.
EP (Extended Play) provides recording time three times as long as
SP (Standard Play), however, SP produces better picture and audio
quality.
6
Press
z
REC to start recording.
The recording indicator lights up red in the display window.
To stop recording
Press
x
STOP.
INPUT
SELECT
• CH
SP / EP
STEREO SAP LP SP EP VIDEO APC EDIT
VTR
1 2 3
AV INSERT BLANK
STEREO SAP LP SP EP VIDEO APC EDIT
VTR
1 2 3
AV INSERT BLANK
STEREO SAP LP SP EP VIDEO APC EDIT
VTR
1 2 3
AV INSERT BLANK
STEREO SAP LP SP EP VIDEO APC EDIT
VTR
1 2 3
AV INSERT BLANK
REC