Sony RMT-V267B Service Manual Download Page 10

Page: 10 / 91

1-5

Additional Operations

Playing/searching at various speeds (continued)

Mark on the TV screen

Slow motion

Pause

Slow motion

in reverse

Playback mode

Normal speed

Double speed

High speed

Double speed

Normal speed

in reverse

X 2

–

X 1

–

Playback options

Operation

Replay a scene

Rewind and start play

To resume normal playback

Press

PLAY.

Using the shuttle ring

With the shuttle ring, you can operate a variety of playback options. There
are two ways for using the shuttle ring, normal mode and jog mode.

To use the shuttle ring in normal mode

During playback or pause, turn the shuttle ring clockwise or
counterclockwise. Each change in the shuttle ring position changes the
playback mode, and the corresponding mark appears on the TV screen for a
few seconds in the following way if the on-screen display function is on:

During playback, first press CLEAR when you come to a scene
you want to replay later. When you are ready to replay the
scene, press

STOP. Then press TAPE RETURN and

PLAY in quick succession.

During stop, press

PLAY on the VCR while holding down

REW on the VCR.

Additional Operations

To use the shuttle ring in jog mode

Use this mode for frame-by-frame playback.

Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring counterclockwise.
The frame shift speed depends on the speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button goes off.

Tip

• Adjust the picture using the TR/– buttons if:

– Streaks appear while playing in slow motion.
– The picture shakes while pausing.

To set tracking to the center position, press both buttons (+/–) at the same time.

Notes

• The sound is muted during these operations.
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but

the picture quality cannot be guaranteed.

• The picture may have snow:

– when playing at high speed in reverse
– when playing in reverse slow motion
– when playing in reverse

• If the playback mode mark doesn’t appear on the TV screen, press DISPLAY.
• The picture may flutter a bit when playing in slow motion.

Additional Operations

Creating a
favorite channel
list with Station
ID

You can create your favorite channel list
of the TV channels with station ID. You
can store up to 10 channels with station
ID and select the channel from your
favorite channel list.

Before you start...

• Set FAVORITE CH to ON in the

ADVANCED OPTIONS menu
(page␣33).

Creating your favorite channel list

Press ENTER.

The FAVORITE CH screen appears on the TV screen.

Press CH +/– to select the station ID you
want to replace.

You can also use the cursor stick

instead.

Move the cursor stick

to select the

station ID you want to set.