Sony RM-AV3100 - Integrated Remote Commander Operating Instructions Manual Download Page 72

Page: 72 / 112

Press the Mode Display key (SET)
once to display “RESET” on one
of the Label keys on the display.

Press the RESET key.

“RESET” appears on the Mode
Display key.

Press the TIMER button.

“PROG1” - “PROG4” are displayed.
To change the Label keys, press the
TIMER button.

Press the Label key of which
timer settings you want to erase.

The selected program number is
displayed on the left Label key.

Press the YES key.

During erasing, “

c c

” stays lit. When

erasing finishes, “OK” is displayed
with a beep sound.

If you press the NO key

The display returns to Step 4.

Press COMMANDER OFF.

COMMANDER

OFF

If you keep COMMANDER OFF
pressed for more than 2 seconds

The Commander turns off.

If you keep COMMANDER OFF
pressed for less than 2 seconds

The Commander returns to the previously
set mode.

Setting the Timer (continued)

Summary of Contents for RM-AV3100 - Integrated Remote Commander

















































































































Search results

Summary of Contents for RM-AV3100 - Integrated Remote Commander

Reviews:

Related manuals for RM-AV3100 - Integrated Remote Commander

Brands by name

Popular brands

Sony RM-AV3100 - Integrated Remote Commander, Operating Instructions Manual

Search results

Summary of Contents for RM-AV3100 - Integrated Remote Commander

Reviews:

Related manuals for RM-AV3100 - Integrated Remote Commander

Brands by name

Popular brands