Sony QUALINA 004, Owner'S Manual

Page: 23 / 46

44 45
INPUT SETTING menu (continued)
Memory
No.
Preset signal fH (kHz) fV (Hz) Sync H Size
22 1024 × 768 XGA VESA 43 Hz 35.524 43.479 H-pos V-pos 1264
23 XGA VESA 60 Hz 48.363 60.004 H-neg V-neg 1344
24 XGA VESA 70 Hz 56.476 69.955 H-neg V-neg 1328
25 XGA VESA 75 Hz 60.023 75.029 H-pos V-pos 1312
26 XGA VESA 85 Hz 68.677 84.997 H-pos V-pos 1376
27 1152 × 864 SXGA VESA 70 Hz 63.995 70.019 H-pos V-pos 1472
28 SXGA VESA 75 Hz 67.500 75.000 H-pos V-pos 1600
30 1152 × 900 Sunmicro LO 61.795 65.960 H-neg V-neg 1504
31 Sunmicro HI 71.713 76.047 C-neg 1472
32 1280 × 960 SXGA VESA 60 Hz 60.000 60.000 H-pos V-pos 1800
34 1280 × 1024 SXGA VESA 43 Hz 46.433 43.436 H-pos V-pos 1696
35 SGI-5 53.316 50.062 SonG 1680
36 SXGA VESA 60 Hz 63.974 60.013 H-pos V-pos 1696
43 480/60p 480/60p
(Progressive
component) 31.470 60.000
SonG/Y or
composite sync
1716
44 575/50p 575/50p
(Progressive
component) 31.250 50.000 1728
45 1080/50i 1080/50i (DTV) 28.130 50.000 —
47 720/60p 720/60p(DTV) 45.000 60.000 1650
48 720/50p 720/50p(DTV) 37.500 50.000 1980
49 1080/24PsF DTV 1080/48i 27.000 48.000 —
50 540/60p 540/60p 33.750 60.000 H-pos V-pos 2200
52 1400 × 1050 SXGA+ 60 Hz 63.981 60.020 H-neg V-neg 1688
73 1280 × 720 1280 × 720 60 Hz 47.772 59.855 H-neg V-pos 1664
• When you input a signal that is not preset,
the picture may not be displayed correctly.
• No. 22 and 34 are interlace signals.
• No. 11 to 21, 23 to 28, 32, and 36 are
available for input signals via the DVI-D
connector. Set “DVI Signal Sel.” to
“Computer.”
Also, No. 52 and 73 are available when
DDC (Display Data Channel) is set to off on
the computer. DDC allows the computer to
obtain information about features from the
monitor. It also allows output of the most
appropriate refresh value automatically,
based on the resolution of the monitor.
However, the screen resolution of the
projector may not be supported or it is
possible DDC cannot be turned off,
depending on the computer. For the
details, refer to the operating instructions
supplied with your computer.
• No. 3, 4, 5, 43, 44, 45, 47, and 48 are
available for input signals via the DVI-D
connector. Set “DVI Signal Sel.” to “Video
GBR.”
• No. 3, 4, 5, 11, 43, 44, 45, 47, and 48 are
available for input signals via the HDMI
connector.
After the data is recalled from the preset
memory for the following signals, adjust “H
Size.” Then, make finer adjustments using
“Shift.”
Signal Memory
No.
H Size
Super Mac-2 23 1312
SGI-1 23 1320
Macintosh 19" 25 1328
Macintosh 21" 28 1456
Sony News 36 1708
PC-9821 1280 × 1024 36 1600
WS Sunmicro 37 1664
Note
• Depending on the aspect ratio of the input signal,
part of the screen may be displayed in black.
Adjustments and Settings Using the Menu