Sony QUALINA 004, Owner'S Manual

Page: 17 / 46

32 33
PICTURE SETTING menu
PICTURE MODE
You can select the picture mode that best
suits the type of program or your
room’s conditions.
Dynamic:
Select this for enhanced picture contrast and
sharpness.
Standard:
Recommended for normal viewing conditions
in your home. Select this if you encounter
roughness when viewing the picture with
“Dynamic.”
Cinema:
Select this for a soft, film-like picture.
User1, User2, User3:
Adjust the quality of the picture to suit your
taste. The settings will be stored in a
pre-selected memory area of the projector.
Press one of the User1, 2, or 3 buttons, then
adjust the picture using the menus.
To view the picture with the adjusted picture
quality, press the respective button.
To store the settings
1 Select “User1,” “User2,” or “User3.”
2 Select and adjust the “ADJUST PICTURE”
items. You can also select “Dynamic,”
“Standard,” or “Cinema” mode and adjust
the “ADJUST PICTURE” items for these
modes as well. To reset the items to the
factory setting, press the RESET button
on the remote.
������� �������
������� �����
������ ���������� ��������
�������
���� ���� �����
����� ����
ADJUST PICTURE
The ADJUST PICTURE menu is used for
adjusting the picture.
Items that cannot be adjusted for a particular
input signal do not appear in the menu.
�������
������ �������
��������� ��
����������� ��
������ ��
���� ��
���������� ��
����� ����� ����� ���
����� ����������� ���
����� ������
������
��� ����� ��� ���� ��������
������ ����� ������
������� �������
���� ���� ����� �����
����� ����
��������
Contrast
Adjusts the picture contrast.
The higher the setting, the greater the
contrast.
The lower the setting, the lower the contrast.
Brightness
Adjusts the picture brightness.
The higher the setting, the brighter the
picture.
The lower the setting, the darker the picture.
Color
Adjusts color intensity.
The higher the setting, the greater the
intensity.
The lower the setting, the lower the intensity.
Hue
Adjusts color tones.
The higher the setting, the more greenish the
picture becomes.
The lower the setting, the more purplish the
picture becomes.
Sharpness
Adjusts the picture sharpness.
The higher the setting, the sharper the
picture.
The lower the setting, the softer the picture.
Black Level Adj.
Select “Off,” “Low,” or “High,” depending on
the source signal, to produce a bolder,
dynamic picture.
Note
• You cannot adjust “Black Level Adj.” when input
preset memory No.5, 45, or 49 (page 43) is input
and “Source Direct” is set to “On.”
Gamma Correction
Select “Off (no gamma correction),”
“Gamma1,”“Gamma2,” or “Gamma3.”
You can set and store your favorite tone to
“Gamma1,” “Gamma2,” and “Gamma3”
using “ImageDirector” (see page 52).
Note
• You cannot adjust “Gamma Correction” when input
preset memory No.5, 45, or 49 (page 43) is input
and “Source Direct” is set to “On.”
continued
Adjustments and Settings Using the Menu