background image

Contents

75

Section Index

K.   Auto Focus and Focus Aids

K3. Changing the AF speed and responsiveness

You can use the AF Transition Speed setting

 (MENU: 

Shooting – Focus – AF Transition Speed) 

to adjust how 

quickly the focus adjusts. When set to 7 (Fast) the focus will 
move very quickly from one focus distance to another, this 
may be useful for following fast moving objects and action. 
When set to 1 (Slow) the focus will change from one distance 
to another very slowly. This may be more appropriate for 
drama.

RECOMMENDATION:

 If the focus is set to a very 

fast transition speed the focus can sometimes look 
unnatural as the focus flicks quickly from one object 
or subject to another. For more natural looking focus, 
I recommend using a slightly slower setting than 
default, perhaps 3.

The AF Subject Shift Sensitivity setting allow you to adjust 
how strongly the AF will hold on to the object it is focused 
on before releasing and focusing on another object 

(MENU: 

Shooting – Focus – AF Subj.Shift Sens)

. When set to 

5(Responsive) if a new object comes into the shot the AF 
will respond quickly and move the focus to the new object. 
When set to 1(Locked On) the AF will remain focused on 

Summary of Contents for PXW-FX9






























































































































































Reviews: