105
O. Using the Cine EI Mode (in detail)
O4. Cine EI example (Using the s709 MLUT)
I recommend the use of the built in Waveform Display to
assist with monitoring and setting the exposure in the
CineEI mode. This can be enabled via (MENU: Monitoring –
Display On/Off – Video signal Monitor).
When the SDI/HDMI output is set to HD the waveform
display will be measuring the brightness of the chosen
LUT. When the SDI/HDMI output is set to 3840x2160 UHD
the waveform display will show the brightness of the
S-Log3 recordings. What the waveform is measuring is
indicated immediately above the waveform display.