Sony PWS-4500 Operation Manual Download

Page: 17 / 63

ap
te

r 4

enu

Playback indicator

Displays “

” during playback. The following are

displayed as the playback mode.
• No indication: Normal file playback
•

(File Repeat): File repeat playback

•

(List): Normal playlist playback

•

(List Repeat): Playlist repeat playback

Playback status indicator

The following are displayed as the playback status.
• CLOSE
• STOP
• PLAY (playback speed)
• SHUTTLE (playback speed)
• JOG (FWD/REV)
• VAR (playback speed)
• STILL

[FILE]

Displays the video format of the file being played back.

[OUT]

Displays the video format of the video signal being output.

Audio track (detail display mode only)

Displays which external channel is used for each audio
track, and the signal (SDI, NMI, or AES/EBU) used.

Network Session

Displays the operating status of the network connection.
The following information is displayed.

Session

Displays the session name (N1 to N8).

File Name

Displays the name of the file being transferred.

Direction

Displays the transfer direction as an icon (unit t computer,
unit T computer).

Port

Displays the transfer speed (1G/10G) of the network.

Progress

Displays the transfer progress.

Abort

Clicking the button displayed for each session forcibly
terminates network transfer.

Summary of Contents for PWS-4500
































































Search results

Summary of Contents for PWS-4500

Reviews:

Related manuals for PWS-4500

Brands by name

Popular brands

Sony PWS-4500, Operation Manual

Search results

Summary of Contents for PWS-4500

Reviews:

Related manuals for PWS-4500

Brands by name

Popular brands