Sony PWS-4500 Operation Manual Download

Page: 14 / 63

Chapter

ap
te

r 4

enu

Web Menu

The web menu comprises the following screens.

Home screen:

Displays the operating status of unit’s

boards and the network.

Status screen:

Displays a list of errors and warnings that

have occurred on the unit.

System screen:

Makes basic settings for the unit.

Port screen:

Makes settings for each port of the unit.

File screen:

Displays a file list.

Storage screen:

Displays information about memory and

configures the memory of the unit.

Maintenance screen:

Used for maintenance of the unit.

For details about this screen, refer to the Service
Manual.

SNMP screen:

Makes SNMP settings. For details about

this screen, refer to the Service Manual.

In the descriptions of each screen, the underlined option is
the default value for each item.

Title Bar

The title bar is common to each screen of the web menu.

Serial number

Displays the serial number of the unit.

Number of open ports

Storage capacity

Error/warning indicators

Displays the number of errors and warnings that have
occurred.

Clicking the indicator displays detailed information about
the error/warning.

REC INHI indicator

Indicates when recording is inhibited (red).
The indicator is white when recording is supported.

Home Screen

Displays the operating status of units boards and the
network.
The Home screen supports simple display mode and detail
display mode. You can switch mode using the [Simple]/
[Detail] buttons.
Clicking the

button, turning it on, updates the

screen display automatically.

The [Control] button function is provided for service
administrators. A password is required to use it.

Summary of Contents for PWS-4500
































































Search results

Summary of Contents for PWS-4500

Reviews:

Related manuals for PWS-4500

Brands by name

Popular brands

Sony PWS-4500, Operation Manual

Search results

Summary of Contents for PWS-4500

Reviews:

Related manuals for PWS-4500

Brands by name

Popular brands