Sony PWS-110RX1, Installation Manual

Page: 7 / 22

1-1 (E)
PWS-110RX1
1-1. Installation Procedure
The following flowchart shows the installation procedure
of the unit.
For details of each work, refer to the relevant section.
The Operation Manual is also required for the items
marked with an asterisk (
*
).
1-3. Operating Environment and Installation Space
1-4. Power Supply Determination of
installation place
Start
End
Unpacking
1-5. Installing an Optional Power Unit
(This process is not necessary if you don't install an optional power unit.)
1-6-3. Mounting to Rack (M5 Screw Holes)
Refer to the Installation Manual for RMM-10.
(This process is not necessary if you don't mount this unit into a rack.)
1-6-4. Mounting to Rack (Square Holes)
(This process is not necessary if you don't mount this unit into a rack.)
1-6-5. Installing the Front Panel
1-7. Connector Input/Output Signals
1-8. Connectors and Cables
Check the operation of the unit depending on the configuration of the system.
1-6-1. Part Required
1-6-2. Removing the Front Panel
Connection
Operation check
Installing an optional power unit
Installing the main unit to the rack
Installing the front panel
Removing the front panel
Section 1
Installation
1-2. Accessories
.
Operation Manual (1)
.
Installation Manual (this manual) (1)
.
Operation Guide (1)
.
Screws for Rack Mount (4)