Sony PDW-HD1550, Service Manual

Page: 58 / 276

Main
code Sub code Mainte-
nance
logger Drive log-
ger Description
08 091 ○ ○ The spindle motor does not work (or there is no FG signal) after the
specified time period has passed.
095 ○ ○ The spindle motor cannot be stopped and continues to rotate (or the
FG signal is abnormal).
292 ○ ○ Spindle motor rotation was detected during vertical movement of
loading.
*1
992 ○ ○ Spindle motor rotation was detected during unchucking.
2-2-2. Error 20
When a loader assembly error is detected, one of the following error codes is displayed.
Main
code Sub code Mainte-
nance
logger Drive log-
ger Description
20 018 ○ ○ Abnormal current was detected in the loading motor.
111 ○ ○ Horizontal movement of loading did not end within the specified time
period.
117 ○ ○ Displacement of cartridge was detected in the loader during horizontal
movement of loading.
118 ○ ○ Abnormal current was detected in the loading motor during horizontal
movement of loading.
211 ○ ○ Vertical movement of loading did not end within the specified time pe-
riod.
213 ○ ○ Cartridge could not be detected even after loading.
217 ○ ○ Displacement of cartridge was detected in the loader during vertical
movement of loading
218 ○ ○ Abnormal current was detected in the loading motor during vertical
movement of loading.
811 ○ ○ Eject operation did not end within the specified time period.
818 ○ ○ Abnormal current was detected in the loading motor during eject oper-
ation.
911 ○ ○ Unchucking operation did not end within the specified time period.
918 ○ ○ Abnormal current was detected in the loading motor during unchucking
operation.
F10 ○ ○ A loader alarm was detected during boot sequence.
2-2-3. Error 3X
When a sensor system error in the optical drive is detected, one of the following error codes is displayed.
Main
code Sub code Mainte-
nance
logger Drive log-
ger Description
34 900 ○ ○ Ch-A detected error of the loader position sensor (LDR-36 board).
909 ○ ○ Ch-A detected error of the sensor hole (SE-1004 board, SE-1005 board).
A00 ○ ○ Ch-B detected error of the loader position sensor (LDR-36 board).
Continued
*1: Vertical movement of loading/unloading is also performed by executing STBY ON/OFF.
PDW-HD1550
2-4