94
System Menu
Cha
p
te
r 6
Me
nu
s
AUDIO OUTPUT [> Audio Out]:
Select the channels for audio
output from the AUDIO OUTPUT 1/3 and 2/4 connectors.
*
CH1/CH2 [>> CH1/CH2]:
Output channel 1 to the AUDIO
OUTPUT 1/3 connector and channel 2 to the AUDIO
OUTPUT 2/4 connector.
CH3/CH4 [>> CH3/CH4]:
Output channel 3 to the AUDIO
OUTPUT 1/3 connector and channel 4 to the AUDIO
OUTPUT 2/4 connector.
REMOTE I/F [> Remote I/F]:
Select how to perform remote
control, when the remote control switch is set to
REMOTE.
i.LINK [>> i.LINK]:
Use the S400 connector.
*
9PIN/RS-232C [>> 9P/232C]:
Use either the REMOTE(9P)
connector or the RS232C connector, depending on the
setting of the remote connector selector switch.
9PIN(PARA)[>> Para Run]:
Use the REMOTE(9P) connector
to connect several PDW-F70 units and perform remote
control from one of them specified as the parent.
BAUDRATE [> BaudRate]:
Select the communications speed
(bps) of the RS232C connector.
*
9600 [>> 9600]
19200 [>> 19200]
38400 [>> 38400]
57600 [>> 57600]
115200 [>> 115200]
i.LINK MODE [> i.LinkMode]:
Select the type of connection
for the S400 connector.
*
AV/C [>> AV/C]:
AV/C connection.
FAM(PC REMOTE) [>> FAM]:
FAM connection.
NETWORK ENABLE [> Network En]:
Select the positions of
the remote control switch which enable access to the
network.
*
NETWORK [>> Network]:
Only when the switch is set to
“NETWORK”.
NETWORK&RS-422A[>> Net&Rmt]:
Only when the switch is
set to “NETWORK”, or when the switch is set to
“REMOTE” and the menu item REMOTE I/F is set to
“9PIN/RS232”.
WIRELESS RMT [> Wireless]:
Enable or disable operation
from the wireless remote commander.
DISABLE [>> DISABLE]:
Disable.
*
ENABLE [>> ENABLE]:
Enable.
METADATA [Metadata]: Metadata settings
Description
INDEX POSITION [> Index Pos]:
Specify which frame to use
as the thumbnail image (index picture) when recording.
0SEC [>> 0 sec] to 10SEC [>> 10 sec]:
The frame at 0
seconds to 10 seconds from the top of the clip, specified in
units of 1 second.
Factory default setting:
*
0SEC
STORE OWNER [> Ownership]:
Create UMID owner
information.
The STORED OWNERSHIP screen appears.
For details, see Appendix “Setting UMID ownership
information” on page 119.
UMID [> UMID]
SDI OUT [>> SDI out]:
Select
whether to output UMID
in the VANC of HD/
SDSDI output.
*
ON [>>> ON]:
Output.
OFF [>>> OFF]:
Do not output.
SD VANC LINE [>> SDI
line]:
When SDI OUT is
set to “ON”, select the
line of SDSDI output in
which to output the
UMID.
12LINE [>>> 12 line] to 19LINE [>>> 19 line]:
Select in the
range line 12 to line 19.
Factory default setting:
*
17LINE (line 17)
HD VANC LINE [>> HD line]:
When SDI OUT is set to
“ON”, select the line of
HDSDI output in which to
output the UMID.
9LINE [>>> 9 line] to 20LINE [>>> 20 line]:
Select in the
range line 9 to line 20.
Factory default setting :
*
17LINE (line 17)
INTERFACE SELECT [Interface]: Settings related to
interfaces
Description
Summary of Contents for PDW-F70
Page 126: ...Sony Corporation ...