Sony PDW-F70 Operating Instructions Manual Download Page 91

Page: 91 / 126

System Menu

ap
te

r 6

enu

DISC PROTECTION [Disc protct]: Settings related to disc
protection

Description

STILL TIMER [>> STL timer]:

Specify the length of time the

unit can be in still image mode before switching to disc
protection mode.

0.5SEC [>>> 0.5 sec] to 30MIN [>>> 30 min]:

Select time

from 16 settings ranging from 0.5 second to 30 minutes.

Factory default setting:

8MIN [>>> 8 min] (8 minutes)

VIDEO CONTROL [Video]: Settings related to video
control

Description

INT VIDEO SG [> Video SG]:

Select the test signal to be

output from the internal test signal generator. When you
set V INPUT in the HOME page of the function menu to
“SG”, the internal signal generator is activated and
outputs the selected test signal. You can record this
signal.

100% COLOR BARS [>> 100% bars]:

100% color bar signal

RAMP(Y/C) [>> Ramp]:

Bias signal

GRAY [>> Gray]:

Grayscale signal

BLACK BURST [>> BB]:

Black burst signal

SETUP ADD [> Setup add]:

Select whether to add black

setup to the composite video output signal.

OFF [>> OFF]:

Do not add setup.

ON (ADD) [>> ON]:

Add setup.

CC (F1) BLANK [> CC1 blank]:

Select whether to suppress

the closed caption signal to be superimposed on the 1st
field of the output video signal.

Note

When you play back a disc with a recorded closed caption
signal, the closed caption signal is multiplexed into SDSDI and
composite output only.

OFF [>> OFF]:

Suppress.

ON [>> ON]:

Do not suppress.

CC (F2) BLANK [> CC2 blank]:

Select whether to suppress

the closed caption signal to be superimposed on the 2nd
field of the output video signal.

Note

When you play back a disc with a recorded closed caption
signal, the closed caption signal is multiplexed into SDSDI and
composite output only.

OFF [>> OFF]:

Suppress.

ON [>> ON]:

Do not suppress.

FRAME PB [> Frame PB]:

Select whether to output fields or

frames as still images of video.

AUTO [>> AUTO]:

Output a field image when the format is

interlaced, and output a frame image when the format is
progressive.

FRAME[>> FRAME]:

Always output a frame image.

Summary of Contents for PDW-F70































































































































Search results

Summary of Contents for PDW-F70

Reviews:

Related manuals for PDW-F70

Brands by name

Popular brands

Sony PDW-F70, Operating Instructions Manual

Search results

Summary of Contents for PDW-F70

Reviews:

Related manuals for PDW-F70

Brands by name

Popular brands