87
System Menu
C
h
ap
te
r 6
M
enu
s
AUTO EE SELECT [> Auto
EE]:
Determine whether
the unit enters E-E mode
or PB mode when audio
and video signals from
other equipment are input.
DISC OUT [>> DISC OUT]:
When no disc is loaded.
*
EE [>>> EE]:
Output video and audio signals received from
other equipment.
PB [>>> PB]:
Suppress video and audio signals.
F.FWD/REV [>> F.FWD/
REV]:
Operations when
in fast forward or rewind
mode
EE [>>> EE]:
Output video and audio signals received from
other equipment.
*
PB [>>> PB]:
Output playback video. Suppress audio signals.
STOP [>> STOP]:
Operations
when in stop mode
EE [>>> EE]:
Output video and audio signals received from
other equipment.
*
PB [>>> PB]:
Output a still image.
STANDBY OFF [>> STBY
OFF]:
Operations when
in standby-off mode
LOCAL ENABLE [> Local ENA]:
Select the buttons that can
be operated on this unit even when the remote control
switch is set to REMOTE.
ALL DISABLE [>> All DIS]:
The EJECT button and the
buttons in the recording/playback control block cannot be
operated.
*
STOP & EJECT [>> STOP&EJ]:
Only the STOP button and
EJECT button can be operated.
ALL ENABLE [>> All ENA]:
The EJECT button and all of the
buttons in the recording/playback control block can be
operated. The preroll time can be set and time data can be
selected on this unit.
REC FORMAT [> REC format]:
Select the recording format
(MPEG-2 compression rate).
HQ [>> HQ]:
35Mbps
*
SP [>> SP]:
25Mbps
LP [>> LP]:
18Mbps
DISC END [> Disc End]:
Select what the unit should do when
the free disc capacity is exhausted during recording.
GOTO TOP [>> GOTO TOP]:
Move to the top of the disc.
END STOP [>> END STOP]:
Stop at the end of the disc.
*
EJECT [>> EJECT]:
Eject the disc automatically.
CLIP TITLE [> Clip Title]:
Specify how to assign clip
titles.
AUTO TITLE [>> AT Title]:
Select whether to assign
clip titles automatically.
*
DISABLE [>>> DISABLE]:
Do not assign.
ENABLE [>>> ENABLE]:
Assign.
TITLE [>> Title]:
Assign
arbitrary titles.
The CLIP AUTO TITLING screen appears.
For details, see “To assign clip titles” (page 60) in Chapter 4.
FILE NAMING [> File Name:
Specify the clip and clip
list name format
NAMING FORM [>> Name
Form]:
Specify the clip
and clip list name format.
*
C**** [>>> C****]:
Standard format
free [>>> free]:
Enable free format.
AUTO NAMING [>> AT
Naming]:
Specify the
format of the file names
generated when clips are
recorded.
*
C**** [>>> C****]:
Standard format
title [>>> title]:
Assign the same name as clip title.
SYSTEM SEL [> System
Sel]:
Select the system
frequency and area of
use.
Note
After changing any of the sub-
items, press the on/standby
switch to power the unit off
(put it into standby), and then
press it again to power the unit
on. The initial settings of the
setup menu as a whole will
change to reflect the settings
made here.
SYSTEM FREQ [>> Sys
Freq]:
Select the system
frequency.
*
60I [>>> 60i]:
59.94i
50I [>>> 50i]:
50i
30P [>>> 30P]:
29.97P
25P [>>> 25P]:
25P
23.98P [>>> 23.98P]:
23.98P
UC/J [>> UC/J]:
Select the
area of use.
UC [>>> UC]:
For areas outside Japan
*
J [>>> J]:
For Japan
23.9P OUTPUT [>> 23.9P
out]:
Select the monitor
output when the
SYSTEM FREQ is
“23.98P”.
*
23.98PsF [>>> 23.9PsF]:
Output as 23.98P.
2-3 PULL DOWN [>>> 2-3PD]:
Output after pulldown
conversion to 59.94i.
OPERATIONAL FUNCTION [Operational]: Operation
settings
Description
Summary of Contents for PDW-F70
Page 126: ...Sony Corporation ...
