manualshive.com logo in svg

Sony PCWA-C500 - Wireless Lan Pc Card, Operating Instructions Manual

The Sony PCWA-C500 is a high-performance Wireless Lan Pc Card that allows you to connect to the internet wirelessly with ease. To get started quickly, refer to the user-friendly Quick Start Manual available for free download on our website. Simply visit manualshive.com to access the manual and unleash the full potential of your Sony PCWA-C500.

Share
Download
background image

39

Wireless LAN connection

6

Click Connect.

Communication with the Access Point is established.

If you are not going to change the Access Point settings, this completes
all the necessary settings. If you want to change the Access Point
settings, follow the instructions below.

Note

To use Access Point to connect to the Internet, you must change the Access Point
factory default settings.

7

Click AP Setting on the Wireless Panel.

Your web browser starts and displays the Access Point setup page.

Notes

• If your web browser is configured to use a web proxy server, set the web browser

proxy setting so that the browser does not use a proxy server for the Access Point
IP address. (The factory default Access Point IP address is 192.168.11.1.)

• Depending on the firmware version of the Access Point, the Access Point setup

page may differ from the following screen.

Summary of Contents for PCWA-C500 - Wireless Lan Pc Card

































































Reviews:

No comments

Related manuals for PCWA-C500 - Wireless Lan Pc Card

D-Link DXS-3610-54S Quick Installation Manual preview
DXS-3610-54S
Brand: D-Link Pages: 38
D-Link Web Smart DES-1210-28P Selection Manual preview
Web Smart DES-1210-28P
Brand: D-Link Pages: 6
D-Link xStack Storage DSN-4000 Series Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 23
D-Link Express EtherNetwork DI-604 Brochure preview
Express EtherNetwork DI-604
Brand: D-Link Pages: 7
D-Link xStack Storage DSN-4000 Series Cli User'S Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 97
RadiSys EPC-31 Hardware Reference Manual preview
EPC-31
Brand: RadiSys Pages: 44
Acqiris SA217P Startup Manual preview
SA217P
Brand: Acqiris Pages: 22
Behringer EXPANSION CARD X-DANTE Quick Start Manual preview
EXPANSION CARD X-DANTE
Brand: Behringer Pages: 65
Campbell NL115 User Manual preview
NL115
Brand: Campbell Pages: 38
East Coast Datacom PDS-1/10G User Manual preview
PDS-1/10G
Brand: East Coast Datacom Pages: 19
ZALMAN CNPS11X Extreme User Manual preview
CNPS11X Extreme
Brand: ZALMAN Pages: 12
Segger J-Link-OB-STM32F072-128KB User Manual preview
J-Link-OB-STM32F072-128KB
Brand: Segger Pages: 18
Seagate CHEETAH ST34501FC Product Manual preview
CHEETAH ST34501FC
Brand: Seagate Pages: 68
Echo LAYLA 3G Owner'S Manual preview
LAYLA 3G
Brand: Echo Pages: 21
Echelon i.LON SmartServer Hardware Manual preview
i.LON SmartServer
Brand: Echelon Pages: 34
ST STEVAL-SCR002V1 User Manual preview
STEVAL-SCR002V1
Brand: ST Pages: 28
ADLINK Technology VPX3000 Series Manual preview
VPX3000 Series
Brand: ADLINK Technology Pages: 95
Promise Technology Pegasus R4 Product Manual preview
Pegasus R4
Brand: Promise Technology Pages: 148

Brands by name

Popular brands

Load more brands