Sony PCV-RXG408 User Manual Download Page 63

Page: 63 / 96

Sony V

Desktop User

Guide

Getting help

About the computer and software

My computer does not start

❑

Check that the computer is plugged into a power source and that it is turned on.

❑

Check that the power indicator on the front panel of the computer indicates that the power is on.

❑

Confirm that the power cord and all cables are connected firmly.

❑

If you have plugged the computer into an Uninterrupted Power Supply (UPS), make sure the UPS is
turned on and works.

❑

Check that the monitor is properly connected to the main unit. Check that the brightness and contrast
controls are adjusted correctly.

❑

Moisture condensation may have occurred. Wait at least an hour before turning the computer on.

The message 'Press

<F1>

to continue,

<F2>

to enter setup' appears at startup

If the message

Press <F1> to continue, <F2> to enter setup

appears at the bottom of the display, you

need to initialise the BIOS.

To initialise the BIOS, proceed as follows:

Turn off the computer.

Remove any peripheral devices connected to the computer.

Turn on the computer and press

<F2>

when the Sony logo appears.

The BIOS setup menu screen appears.

Use the arrow keys to select the

Exit

menu.

Press

<F5>

or use the arrow keys to select

Load Setup Defaults

. The message

Load default

configuration now?

appears.

Make sure that

Yes

is selected and then press

<Enter>.

Summary of Contents for PCV-RXG408

































































































Search results

Summary of Contents for PCV-RXG408

Reviews:

Related manuals for PCV-RXG408

Brands by name

Popular brands

Sony PCV-RXG408, User Manual

Search results

Summary of Contents for PCV-RXG408

Reviews:

Related manuals for PCV-RXG408

Brands by name

Popular brands