Sony PCV-RX740, Reference Manual, Page: 54 / 92

VAIO Computer System Reference Manual
40
Installing an Internal Hard Disk Drive
Your system comes with an available bay to hold an additional 3.5-inch
hard disk drive. The drive you install must not require front panel access.
The hard disk drive access light blinks when either internal drive is
active.
1
Configure the jumpers on the new drive as a slave device (see your
new drive’s documentation for configuration instructions).
2
Remove the side panel (see “Removing the Side Panel” on page 24).
✍
Some models, such as Configure-to-Order (CTO) systems, may already have a
second hard disk drive installed.
!
Before opening the system unit, save and close all open files, exit all open
applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.
Power connector
Jumpers
Drive connector