Sony PCV-RX740 Reference Manual Download Page 53

Page: 53 / 92

Upgrading and Maintaining Components

Covering an Open I/O Slot

Slot covers prevent air from escaping through the empty hole. If air
escapes, the components inside the computer cannot be properly cooled.
This may damage some components, especially the main processor,
which generates the most heat.

Slide the tip of the slot cover between the chassis and system board.

Push the slot cover down until it rests firmly on the lip in the chassis.
All add-in card brackets and slot covers rest on this lip.

Replace the slot cover's screw to secure the I/O slot cover.

Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.

Summary of Contents for PCV-RX740





























































































Search results

Summary of Contents for PCV-RX740

Reviews:

Related manuals for PCV-RX740

Brands by name

Popular brands

Sony PCV-RX740, Reference Manual

Search results

Summary of Contents for PCV-RX740

Reviews:

Related manuals for PCV-RX740

Brands by name

Popular brands