Sony PCV-RX462DS System Reference Manual Download

Page: 44 / 134

VAIO Digital Studio™ System Reference Manual

Installing a PCI Add-In Card

Remove the side cover (see

“Removing the Side Cover”

on page 28).

Locate an available expansion slot.

Remove the slot cover adjacent to the selected slot (see

“Removing a

Slot Cover”

on page 43).

Insert the add-in card into the PCI slot. Use a gentle rocking motion,
pressing down until the card is fully seated.

Replace the screw that secures the card.

Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.

✍

Align the card's bracket so that the bottom of the bracket fits into the slot at the
bottom of the chassis. Assure that the top of the bracket fits snugly against the
chassis lip after the card is fully inserted.

Summary of Contents for PCV-RX462DS







































































































































Search results

Summary of Contents for PCV-RX462DS

Reviews:

Related manuals for PCV-RX462DS

Brands by name

Popular brands

Sony PCV-RX462DS, System Reference Manual

Search results

Summary of Contents for PCV-RX462DS

Reviews:

Related manuals for PCV-RX462DS

Brands by name

Popular brands