Sony PCV-RX462DS System Reference Manual Download

Page: 64 / 134

VAIO Digital Studio™ System Reference Manual

Removing the Power Supply

You remove the power supply when you insert a memory module (see

“Installing System Memory”

on page 37).

Remove the screw that secures the power supply to the rear of the
chassis.

Pull the tab (A) that latches the power supply to the chassis.

Slide the power supply up until the power supply clears the chassis.

Rotate the power supply upside down and rest it on top of the chassis
where the hard drive is located.

Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut
down the computer, and unplug the power cord.

Summary of Contents for PCV-RX462DS







































































































































Search results

Summary of Contents for PCV-RX462DS

Reviews:

Related manuals for PCV-RX462DS

Brands by name

Popular brands

Sony PCV-RX462DS, System Reference Manual

Search results

Summary of Contents for PCV-RX462DS

Reviews:

Related manuals for PCV-RX462DS

Brands by name

Popular brands