71
Registering Local Information
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
ISDN Bandwidth (Answer)
Allows you to select the number of ISDN
lines used for answering.
You can select from among 1B (64K), 2B
(128K), 3B (192K), 4B (256K), 5B (320K),
6B (384K), 8B (512K) and 12B (768K).
Audio Mode
Allows you to select the compression format
of audio to be sent to a remote party.
You can select from among G.711, G.722,
G.728 and MPEG4 (MPEG4 AAC).
When the remote system does not support the
audio mode selected by the local site, the mode
automatically becomes “G.711”.
Far End Camera Control
Allows you to select whether to enable the
control of each other’s cameras from each
other’s site.
On:
Enables the control of each other’s
cameras. Normally, set to “On”.
Off:
Disables the control of each other’s
cameras.
H.239
Allows you to select whether to use the
presentation mode based on the H.239
presentation standard.
On:
Enables the presentation mode based on
the H.239 presentation standard.
Off:
Disables the presentation mode based
on the H.239 presentation standard.
H.239 Ratio
When H.239 presentation transmissions are
made with the system, the H.239 presentation
data shares bandwidth with camera images that
are also being sent. This setting allows you to
select how much of the total bandwidth to use
for H.239 presentation data transmissions.
2/3:
Use 2/3 of the total bandwidth for H.239
presentation data transmissions.
1/2:
Use 1/2 of the total bandwidth for H.239
presentation data transmissions.
1/3:
Use 1/3 of the total bandwidth for H.239
presentation data transmissions.
Restrict
Allows you to select the ISDN transmission
rate.
Auto:
Select when connecting a remote
party via a normal ISDN line.
56K:
Select when connecting a remote party
located in a region or country where the
ISDN transmission rate is 56 Kbps.
The system is set to connect an ISDN line at the
transmission rate of 64 Kbps by default.
However, some countries, such as the USA,
and some regions may use the ISDN
transmission rate of 64 Kbps and 56 Kbps. You
may not communicate with such countries or
regions at 64 Kbps, so you must therefore set
“Restrict” to “56K” before dialing.
Screen Size
Allows you to select the screen size of the
picture to be transmitted or received.
You can select from among W4CIF,
W432P, WCIF, 4CIF, CIF and AUTO.
Video Mode
Allows you to select the compression format
of pictures to be transmitted or received.
You can select from among H.263+ and
H.264.
“H.263” during ISDN connections will be
supported in a future version.
Video Frame
Allows you to select the number of video
frames during transmission or reception.
15fps:
Send pictures at a maximum rate of
15 frames per second.
30fps:
Send pictures at a maximum rate of
30 frames per second.
AUTO:
Switch the number of frames
automatically.
SIP: Mode
Communication Bit Rate
Allows you to select the communication bit
rate per point
You can select from among 128Kbps,
384Kbps, 512Kbps, 768Kbps, 1Mbps,
2Mbps, 3Mbps, 4Mbps and Other.
Note
Note
Note
Communication
