123
Starting a Connection by Calling a Remote Party
C
h
a
p
te
r 3:
B
a
si
c
C
o
nn
ect
ion
The system begins dialing the selected party. “Dialing” appears on the
monitor screen. When the system connects to the system on the remote site,
the message “Session Connected.” appears on the screen, and the picture
on the remote site is displayed.
Now you can start communication with the remote party.
To cancel dialing before connecting
While “Dialing” is displayed on the monitor screen, press the DISCONNECT
(
) button or the ENTER button on the Remote Commander.
To switch the display in the Phone Book between the list and the
thumbnails
Each time the F1 button on the Remote Commander is pressed, the display
changes between the list and the thumbnails.
To change the order of display
Each time the F2 button on the Remote Commander is pressed, the display
changes between the list of remote parties’ names in ascending alphabetical
order and that list in descending alphabetical order.
To display the Phone Book during communication
Press the
button on the Remote Commander during communication.
To call a remote party registered in the Private Phone Book
1
Insert the USB storage device that contains the Private Phone Book into a
USB port on the Communication System.
The Phone Book changes to the Private Phone Book.
2
Select “Private Phone Book” in the Home menu, and press the ENTER
button.
3
Use the
V
,
v
,
B
or
b
button on the Remote Commander to select a remote
party you want to call from the Private Phone Book.
4
Press the CONNECT (
) button on the Remote Commander. Or press
the ENTER button to display the submenu, select “Connect” with the
V
,
v
,
B
or
b
button, and press the ENTER button.
Room 101
ISDN 01-2345-6789
Detailed Dial
History
New Entry
Group Edit
Phone Book
Default Group
Home
Cancel
Edit
Copy
Delete
Connect
