Sony PCM-3348HR, Operation Manual

Page: 180 / 256

11-8
Chapter 11 System Configuration
Chapter 11
Setting digital audio signals to advanced
output mode
Use the following procedure.
Setting digital audio signals to advanced output mode
1
Set the D-OUT ADV/NORM switch on the PCM-
3348HR ED-2 board to ADV.
2
Set the ADV OUT switches on the ED-2 board to
the number of words representing the signal
processing time on the digital mixing console you
are using.
The signal processing time can be set to between 0
and 255 words.
Setting the ADV OUT switches
The ADV OUT switches are eight DIP switches,
representing the number of words of advance in
binary. (Each switch indicates a binary one when it is
in the position adjacent to the numeral.) In the
example below, the digital audio signal playback
output is advanced 156 words compared with the
normal playback output mode.
Setting the ADV OUT switches
T o s e t t h e s i g n a l p r o c e s s i n g t i m e o n t h e d i g i t a l
m i x i n g c o n s o l e u s i n g t h e R M - 3 3 4 8 H R
Proceed as follows:
1
Set all the ADV OUT switches on the PCM-
3348HR ED-2 board to ON.
2
Set the D-OUT ADV/NORM switch on the PCM-
3348HR ED-2 board to ADV.
3
Of the numeric buttons on the RM-3348HR, press
1, 2, 3, STORE, =, and 7 in that order.
The LOCATE TIME display of the RM-3348HR
shows “AdV oN123” for a second, and the signal
processing time on the digital mixing console is set
to 123 words.
ED-2 board
ADV OUT
switches
D-OUT
ADV/NORM
switch
11-2 Playback Signal Output Timing with a Mixing Console
S1
S4
ED-2
D-OUT
ADV NORM
E-E NORM
ON
OFF
0 + 0 + 4 + 8 + 16 + 0 + 0 + 128 = 156
8 7 6 5 4 3 2 1
(128) (64) (32) (16) (8) (4) (2) (1)