16
References:
•
RM-3324 Operation Manual, “3-5-6 Direct Trim Adjustment”
•
PCM-3348HR Operation Manual, “4-6-6 Direct Trim Adjustment”
Note
Using this function on the PCM-3324S requires the RM-3324 remote control unit.
For each of the following registers, holding down the corresponding register button
while pressing the TRIM +/– button adjusts the time value in the register, and saves
the new value.
•
IN point register: IN button
•
OUT point register: OUT button
•
Preroll time register: PRE ROLL button
•
Postroll time register: POST ROLL button
•
Sync offset time register: SYNC OFFSET button
•
Memory editing start point register: START EDIT button
•
Memory editing end point register: END EDIT button
11. Direct Trim Adjustment
Direct Trim Adjustment
