32
15-8. Time Shift Editing
Saving the punch-in point and punch-out point
1
Listening to the tape playback sound, press the CUE STORE button at the point
to begin copying to the destination channel.
2
Press and light the RECALL button, then using the numeric buttons, enter the
number of the cue point register used in step
1
.
3
Press the STORE and IN buttons in that order.
4
Press the RECALL, IN, +, RECALL, SOUND MEMORY, =, STORE, and
OUT buttons, in that order.
5
Press the RECALL, IN, STORE and MEM PLAY buttons, in that order.
Carrying out rehearsal and time shift editing
1
Press the MODE button repeatedly until the channel display shows “Au.”
2
Press the MEM PLAY button.
3
Press the REPRO button for the destination channel.
4
Press the AUTO PUNCH button.
This carries out a rehearsal between the punch-in point and punch-out point.
Adjust the cross fade time or editing points as necessary.
5
Holding down the REC button, press the AUTO PUNCH button.
Between the punch-in point and punch-out point, this records the playback
signal from sound memory on the destination channel.
15. Time Shift Editing Using the Sound Memory Function
Time Shift Editing Using the Sound Memory Function
