Sony PCG-FXA47 VAIO User Guide (primary manual), User Manual

Page: 90 / 116

Change text in this variable definition to document title.
90
Troubleshooting Your Notebook
My notebook does not start.
❑
Check that the notebook is plugged into a power source and that it is turned
on. Check that the power indicator on the front panel of the notebook
indicates the power is on.
❑
Check that the battery pack is inserted properly and is charged.
❑
Make sure there is no floppy disk in the floppy disk drive and no bootable
optical disc in the optical disc drive.
❑
Confirm that the power cord and all cables are connected firmly, as
described in the “Connecting a Power Source” section of the printed Quick
Start.
❑
If you plugged the notebook into a power strip or Uninterruptible Power
Supply (UPS), make sure the power strip or UPS is turned on and working.
❑
If you are using an external display, check that it is plugged into a power
source and turned on. Check that the brightness and contrast controls are
adjusted correctly. See the manual that came with the display for details.
❑
Condensation may cause the notebook to malfunction. If this occurs, do not
use it for at least one hour.
❑
Take the battery pack out of the notebook, unplug the power cord, plug it in
again, and then turn on the power.
My notebook starts but a BIOS error appears.
❑
When the internal backup battery is low on power, it may not start your
system properly. The message, “Press <F1> to resume, <F2> to setup”
appears at the bottom of the screen. Follow these steps:
1 Press F2. The BIOS Setup menu appears.
2 Set the date (month/day/year). Press Enter.
3 Press to select System Time, and then set the time (hour: minute:
second). Press Enter.
4 Press to select Exit, and then press to select Get Default Values.
The message “Load default values for all SETUP items.” appears.