Sony PCG-FXA47 VAIO User Guide (primary manual), User Manual

Page: 24 / 116

Change text in this variable definition to document title.
24
Notes on CD and DVD discs
❑
Do not drop or bend the disc.
❑
Do not touch the surface of the disc. Fingerprints and dust on the surface of a
disc may cause reading errors. Proper care of the disc is essential to maintain
its reliability. Do not use solvents such as benzine, thinner, commercially
available cleaners or anti-static spray, as they may cause damage to the disc.
❑
For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the
surface from the center out.
❑
If the disc is badly soiled, moisten a soft cloth with water, wring it out well,
and use it to wipe the surface of the disc from the center out. Wipe off any
remaining moisture with a dry, soft cloth.
To write data to a CD-RW or CD-R disc
*
You can use Sony SonicStage and Microsoft® Windows® XP to write data to a
CD-R or CD-RW disc. To create a CD-R disc that is readable in a CD-ROM
drive, make sure that you finish the writing process before ejecting the disc. For
more information, see the instructions included with Windows® XP.
Notes on writing data to a CD-RW or CD-R disc
❑
For optimal writing speed, deactivate the screen saver and exit anti-virus
software before writing data to a disc.
❑
For best results, use CD-Rs that are compatible with 8x speed.
❑
Your notebook does not support 1x writing speed.
Some discs recorded at 20 or 24 bits may produce noise while playing. If you
have audio devices connected, this could damage your hearing and the
speakers. Reduce the volume before playing a DVD.
Do not switch between LCD and the external display while the DVD is playing.
This may cause a malfunction, and you may need to restart the DVD software.
Do not switch the power saving modes while you are playing the DVD.
Do not use memory-resident utility software to speed up disc access. This
may cause the notebook to malfunction.
* For notebook models equipped with a CD-RW/DVD Combo Drive.