Using the Floppy Disk Drive
19
To remove the floppy disk drive
1
Turn off the notebook.
2
There is a RELEASE lever on the bottom of the computer. Slide this lever in
the direction of the arrow.
3
Slide the drive out of the multipurpose bay.
4
Insert the weight saver. See “Using the Weight Saver” for details.
To reinsert the floppy disk drive
1
Turn off the notebook.
2
If another device is in the multipurpose bay, remove the device. See “To
remove the second battery pack” for details.
3
Insert the floppy disk drive, with the VAIO label facing up, into the
multipurpose bay until the RELEASE lever locks into place.
✍
Do not push the eject button when the LED indicator is turned on. Otherwise, data
may be lost.
Multipurpose bay release lever
Summary of Contents for PCG-FXA47 VAIO User Guide (primary manual)
