Sony PAL NTSC 4.43 SLV-SE80UX Operating Instructions Manual Download Page 73

Page: 73 / 80

Additional Information

Symptom

The picture rolls vertically
during picture search.

The picture has no sound.

The sound is unstable or has an
echo.

No TV programme appears on
the TV screen.

TV reception is poor.

The tape starts playing as soon
as it is inserted.

The tape is ejected when you
press

REC.

Nothing happens when you
press

REC.

The timer does not operate.

The VIDEO PLUS+ menu or the
TIMER menu does not appear.

Remedy

• Adjust the vertical hold control on the TV or monitor.

• The tape is defective.
• If you made A/V connections, check the audio cable

connection.

• When you play a tape with the same sound recorded

on both the hi-fi and normal sound tracks, make sure
AUDIO MIX in the OPTIONS-1 menu is set to OFF.

• Make sure the TV is set to the video channel. If you

are using a monitor, set it to video input.

• If the VCR is connected to the TV using only the aerial

cable, make sure that RF MODULATOR in the
OPTIONS-2 menu is set to ON.

• Select the correct source with the INPUT SELECT

button. Select a programme position when recording
TV programmes; select “L1,” “L2,” or “L3” when
recording from other equipment.

• Adjust the TV aerial.

• The safety tab has been removed. To record on this

tape, cover the tab hole.

• Check that the safety tab has not been removed.

• Make sure the tape is not at its end.

• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer

recording.

• Make sure your timer settings have not already passed

the current time.

• Check that the satellite tuner is turned on.
• The clock stops if the VCR is disconnected from the

mains for more than one hour. Reset the clock and
timer.

• Check that TIMER OPTIONS in the OPTIONS-2 menu

is set correctly.

Recor

ding

Playback

continued

Timer r

ecor

ding

Summary of Contents for PAL NTSC 4.43 SLV-SE80UX

















































































Search results

Summary of Contents for PAL NTSC 4.43 SLV-SE80UX

Reviews:

Related manuals for PAL NTSC 4.43 SLV-SE80UX

Brands by name

Popular brands

Sony PAL NTSC 4.43 SLV-SE80UX, Operating Instructions Manual

Search results

Summary of Contents for PAL NTSC 4.43 SLV-SE80UX

Reviews:

Related manuals for PAL NTSC 4.43 SLV-SE80UX

Brands by name

Popular brands