Menus
30
5. Frame Synchronizer
OFF / SDI in 1 / ALL
Configures the frame synchronizer.
OFF:
Do not use the frame synchronizer.
SDI in 1:
Use the frame synchronizer for the input signal of HD SDI IN connector
1.
ALL:
Use the frame synchronizer for all SDI signals.
Y
6. Audio Select
(Stream 1)
a)
ch1,2
Transmits the Ch 1 and 2 audio signals of the corresponding stream. This is
enabled under default settings.
Y
ch3,4
Transmits the Ch 3 and 4 audio signals of the corresponding stream. The [ch
3,4] checkbox cannot be selected by itself. This is disabled under default
settings.
Y
Delay
When using a frame synchronizer, use this to increase the delay in the audio
signal. The default setting is 0.
Y
(Stream 2)
a)
ch1,2
Transmits the Ch 1 and 2 audio signals of the corresponding stream. This is
enabled under default settings.
Y
ch3,4
Transmits the Ch 3 and 4 audio signals of the corresponding stream. The [ch
3,4] checkbox cannot be selected by itself. This is disabled under default
settings.
Y
Delay
When using a frame synchronizer, use this to increase the delay in the audio
signal. The default setting is 0.
Y
(Stream 3)
a)
ch1,2
Transmits the Ch 1 and 2 audio signals of the corresponding stream. This is
enabled under default settings.
Y
ch3,4
Transmits the Ch 3 and 4 audio signals of the corresponding stream. The [ch
3,4] checkbox cannot be selected by itself. This is disabled under default
settings.
Y
Delay
When using a frame synchronizer, use this to increase the delay in the audio
signal. The default setting is 0.
Y
(Stream 4)
a)
ch1,2
Transmits the Ch 1 and 2 audio signals of the corresponding stream. This is
enabled under default settings.
Y
ch3,4
Transmits the Ch 3 and 4 audio signals of the corresponding stream. The [ch
3,4] checkbox cannot be selected by itself. This is disabled under default
settings.
Y
Delay
When using a frame synchronizer, use this to increase the delay in the audio
signal. The default setting is 0.
Y
Intercom
ENG
Transmits ENG Intercom. This is enabled under default settings.
Y
PROD
Transmits PROD Intercom. The [PROD] checkbox cannot be selected by itself.
This is disabled under default settings.
Y
ENC (Max 8)
Displays the number of selected ENC channels. Up to 8 ENC channels can be
selected.
N
DEC (Max 8)
Displays the number of selected DEC channels. Up to 8 DEC channels can be
selected.
N
Total (Max 10)
Displays the total number of selected channels. Up to 10 channels can be
selected.
N
Item
Description
Target
