Menus
28
8. Analog Audio out Select
Analog out 1,2
When [Analog Audio Direction] is set to [Output], this selects the signal source
for Analog out 1,2. The selectable signals and the initial value differ depending
on the [Transmission Settings] and [Video Format] on the [Structure] page.
SDI in 1:
Outputs the signal that corresponds to the input of HD SDI IN
connector 1.
SDI in 2:
Outputs the signal that corresponds to the input of HD SDI IN
connector 2.
SDI in 3:
Outputs the signal that corresponds to the input of HD SDI IN
connector 3.
Opposite SDI in 1:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 1.
Opposite SDI in 2:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 2.
Opposite SDI in 3:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 3.
–:
Does not output audio.
Y
Ch1,2 / Ch3,4:
Selects whether to output Ch 1 and 2, or Ch 3 and 4.
Y
Analog out 3,4
When [Analog Audio Direction] is set to [Output], this selects the signal source
for Analog out 3,4. The selectable signals and the initial value differ depending
on the [Transmission Settings] and [Video Format] on the [Structure] page.
SDI in 1:
Outputs the signal that corresponds to the input of HD SDI IN
connector 1.
SDI in 2:
Outputs the signal that corresponds to the input of HD SDI IN
connector 2.
SDI in 3:
Outputs the signal that corresponds to the input of HD SDI IN
connector 3.
Opposite SDI in 1:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 1.
Opposite SDI in 2:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 2.
Opposite SDI in 3:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 3.
–:
Does not output audio.
Y
Ch1,2 / Ch3,4:
Selects whether to output Ch 1 and 2, or Ch 3 and 4.
Y
Analog out 5,6
When [Analog Audio Direction] is set to [Output], this selects the signal source
for Analog out 5,6. The selectable signals and the initial value differ depending
on the [Transmission Settings] and [Video Format] on the [Structure] page.
SDI in 1:
Outputs the signal that corresponds to the input of HD SDI IN
connector 1.
SDI in 2:
Outputs the signal that corresponds to the input of HD SDI IN
connector 2.
SDI in 3:
Outputs the signal that corresponds to the input of HD SDI IN
connector 3.
Opposite SDI in 1:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 1.
Opposite SDI in 2:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 2.
Opposite SDI in 3:
Outputs the signal that corresponds to the input of the
partner unit’s HD SDI IN connector 3.
–:
Does not output audio.
Y
Ch1,2 / Ch3,4:
Selects whether to output Ch 1 and 2, or Ch 3 and 4.
Y
9. Intercom Interface
4W / RTS/ Clear-Com
Selects the interface of the intercom system to be connected to the AUDIO/
INTERCOM connector.
4W / RTS / Clear-Com
Y
Termination
ENG
When the interface is set to [RTS] or [Clear-Com], this selects whether to
terminate the ENG line.
ON:
Terminates the line.
OFF:
Does not terminate the line.
Y
PROD
When the interface is set to [RTS] or [Clear-Com], this selects whether to
terminate the PROD line.
ON:
Terminates the line.
OFF:
Does not terminate the line.
Y
Item
Description
Target
