19
System Frequency Settings
Configure the system frequency for network video
transmissions. The sender side must be configured
according to the video format of the video output device.
1) When 59.94 Hz/60 Hz is selected, 60 Hz video is converted to
59.94 Hz and transmitted.
Note
Video cannot be transmitted properly if the system
frequency and frame frequency of the input video do not
match. Be sure to adjust the video frequency settings on
the video output device.
Input Video Selection
1) Attach the supplied NUA-AA10 analog adapter.
2) Attach the supplied NUA-AA10 analog adapter and the
SMF-405 signal cable (not supplied).
Input Video Upconvert Settings
When the input video resolution is less than 1920×1080,
convert the video resolution to 1920×1080 before
transmission.
Two methods of resolution conversion are available,
expanded mode and dot-by-dot mode.
In expanded mode, the resolution is expanded while
retaining the aspect ratio.
In dot-by-dot mode, a black border is inserted around
the input video, converting the image as a whole to
1920×1080.
Output Video Format Settings
Configure the output video format according to the
transmission video format.
For details on the relationship between the input video
format and the transmission video format, see page 31.
1) 1920×1080/50i Level B-DS formats transmitted from the
NU-IP40S are output as 1920×1080/50p from the NU-
IP40D.
2) 1920×1080/59.94i Level B-DS formats transmitted from the
NU-IP40S are output as 1920×1080/59.94p from the NU-
IP40D.
Note
If the connected monitor does support the above
formats, output at VGA resolution (640×480).
For details on configuring this setting, see “VGA output
setting (DIP switch 1 [7])” under “DIP Switch Settings”
(page 36).
Output Video 3G-SDI Level B Support
Settings
Configure according to the video format sent from the
NU-IP40S.
Output Video Color Space Settings
Configure the color space for the output video.
The configuration is fixed at YCbCr for the 4K video
format.
DIP switch 1
System frequency
[6]
OFF
59.94 Hz/60 Hz
1)
ON
50 Hz
DIP switch 1
Input video
[3]
[4]
[5]
OFF
OFF
OFF
DVI-D
ON
HDMI
ON
OFF
Analog RGB (HD15)
1)
ON
OFF
OFF
Component (RGB)
2)
ON
Component (YCbCr)
2)
ON
OFF
VIDEO
2)
ON
S VIDEO
2)
DIP switch 3
Upconvert mode
[4]
OFF
Expanded mode
ON
Dot-by-dot mode
DIP switch 1
Transmission video format/output
video format
[3]
[4]
[5]
OFF
OFF
OFF
1920×1080/50i
1)
ON
1920×1080/59.94i
2)
ON
OFF
1920×1080/50p
1)
ON
1920×1080/59.94p
2)
ON
OFF
OFF
3840×2160/50p
ON
3840×2160/59.94p
ON
OFF
4096×2160/50p
ON
4096×2160/59.94p
DIP switch 1
3G-SDI Level B Support
[6]
OFF
Other than below
ON
Video format from the NU-IP40S is 3G-
SDI Level B DS
DIP switch 3
Color space
[5]
OFF
RGB
ON
YCbCr
