1. Overview: Location and Function of Parts
16
Menu display and settings on the
viewfinder screen
When a DVF-EL200 is attached to the unit,
press and hold the Menu button on the DVF-
EL200 to display the Monitoring > VF Display
(page 78) and VF Function (page 78)
setup menus on the viewfinder screen. This
allows you to configure these functions while
viewing the viewfinder screen.
Information displayed on the playback screen
The following information is displayed on the playback picture.
9
8
7
6
1
2
4
5
3
1.
Playback media format (codec) indicator
Displays the recording format (codec) of the
playback clip.
2.
Time data display
Displays the duration or timecode, depending
on the TC/Media category > TC Display setting
in the menu (page 56).
3.
Playback status indicator
Displays the playback status.
Displays “CALL” when a CALL command is
received.
4.
Playback clip name display
Displays the first 8 characters of the name of
the playback clip.
5.
Playback media indicator
Displays the type of recording media being
played.
A
(protect) icon appears on the right if the
memory card is write-protected.
6.
Audio level meter indicators
Displays the levels of audio channels 1 and 2
during playback.
7.
Network connection status indicator
Displays the network connection status (LAN
or Wi-Fi).
State
Display
Disconnected or other error (valid
network connection settings)
Flashing
Connected (valid network connection
settings)
On
Network connection function not
used
Blank
8.
Thermometer icon
Displayed when a high temperature warning
message is issued.
The description is displayed in the Info
category in the menu.
9.
Warning icon
Displayed when other than a high temperature
warning message is issued.
The description is displayed in the Info
category in the menu.
