Sony MHC-VX88 Operating Instructions Manual Download Page 7

Page: 7 / 60

To attach the front and satellite
speaker pads

Attach the supplied front and satellite speaker
pads to the bottom of the speakers to stabilize
the speakers and prevent them from slipping.

Inserting two size AA (R6)
batteries into the remote

?/1

TV VOL +/

TV CH +/

TV/VIDEO

Using the remote

You can use the shaded buttons shown below
to operate a Sony TV.

Press

Turn the TV on or off

?/1

Switch the TV's

TV/VIDEO.

video input

Change the TV

TV CH +/–.

channels

Adjusts the volume

TV VOL +/–.

of the TV speaker(s)

Tip

With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.

When carrying this system

Do the following to protect the CD
mechanism.

Make sure that all discs are removed from
the unit.

Hold down CD and then press

?/1

so that

“LOCK” appears in the display.

Unplug the AC power cord.

Summary of Contents for MHC-VX88





























































Search results

Summary of Contents for MHC-VX88

Reviews:

Related manuals for MHC-VX88

Brands by name

Popular brands

Sony MHC-VX88, Operating Instructions Manual

Search results

Summary of Contents for MHC-VX88

Reviews:

Related manuals for MHC-VX88

Brands by name

Popular brands