Basic Operations
17
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Turn SHUTTLE until it clicks (or
press /– on the remote) to
tune in the preset station you want.
* When only one station is preset, “ONE
PRESET” appears in the display.
To
Do this
Turn off the radio
Press
?/1
.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
stations
Use manual or automatic tuning in step 2.
For manual tuning, press + or – (or TUNING
+/– on the remote) repeatedly. For automatic
tuning, press and hold + or – (or TUNING
+/– on the remote).
Tips
• You can switch from another source to the radio
just by pressing TUNER/Band (Automatic Source
Selection).
• When an FM program is noisy, press
STEREO/MONO so that “MONO” appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Turn counter-
clockwise (or
press PRESET –
on the remote)
for lower preset
numbers.
Turn clockwise
(or press PRESET
+ on the remote)
for higher preset
numbers.
Preset number*
Frequency
j
J
MHz
TUNED
STEREO
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (CrO
2
) tapes. The
recording level is adjusted automatically.
1
Press TUNER/BAND to select the
band you want.
2
Turn SHUTTLE until it clicks (or
press /– on the remote) to
tune in a preset station.
Turn clockwise
(or press PRESET
+ on the remote)
for higher preset
numbers.
Turn counter-
clockwise (or
press PRESET –
on the remote)
for lower preset
numbers.
Preset number
Frequency
?/1
(Power)
1
DOLBY NR
5
3
4,6
2
x
MHz
TUNED
STEREO
j
J
continued
