background image

38

9

Repeat steps 5 and 6 for tracks from
the same disc or steps 4 to 6 for
tracks from another disc to program
the remaining tracks to be recorded
on side B.

10

 Press CD SYNC HI-DUB.

Deck B stands by for recording and the
CD player stands by for playback. REC
PAUSE/START button blinks.

11

 Press DIRECTION repeatedly to
select 

g

 to record on one side.

Select 

j

 (or RELAY) to record on

both sides.

12

 Press REC PAUSE/START.

Recording starts.

To stop recording

Press 

x

.

To check the order

Press CHECK on the remote repeatedly. After
the last track, “CHECK END” appears.

To cancel Program Edit

Press PLAY MODE repeatedly until “PGM”
or “SHUFFLE” disappears from the display.

Tip

When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR so that
“DOLBY NR” appears after pressing CD SYNC HI
DUB.

Selecting tape length
automatically

—Tape Select Edit

You can check the most suitable tape length
for recording a CD. Do the following steps
before recording.

1

Place a CD.

2

Press CD.

3

Press EDIT once, so that “EDIT”
flashes.

The required tape length for the
currently selected CD appears, followed
by the total playing time for side A and
side B respectively.

Note

You cannot use Tape Select Edit for discs containing
over 20 tracks.

Recording a CD by specifying track
order (continued)

Summary of Contents for MHC-VX88





























































Reviews: