![background image](http://html.mh-extra.com/html/sony/mhc-v3/mhc-v3_service-manual_1330104100.webp)
MHC-V3/V4D
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF
fi
le search function to
fi
nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note:
If you still see the original page, press the [Enter] key again.
Ver.
Date
Description of Revision
1.4
2015.03
Additional of Mexican, Chilean and Peruvian models (MHC-V4D).
Change all model label P/N at page 4.
Change description of IC102 in ARAGON board.
Change of DAMP, IR, SPEAKER LED and TUNER boards (Suf
fi
x 13).
Change P/N and description of IC007, IC612 and IC615 in ARAGON board.
Change P/N and description of IC1003 in DAMP board.
Change P/N and description of Ref. No. 455 in page 85.
Change P/N of MANUAL, INSTRUCTION in ACCESSORIES section.
Change service code of IC105, IC301 (MHC-V4D) and IC306 in ARAGON board.
Change the location of model label P/N at back panel in page 4.
Delete of Ref. No. 52 in page 77 (service code changed).
1.5
2015.06
Addition of Argentina model.
Add Ref. No. 52 SPRING (LP) in page 77 (service code changed).
Change destination for CORD SET, POWER-SUPPLY (V3: E2, E51/V4D: E2, SAF, MY, E4) in
ACCESSORIES section.
Change illustration of Ref. No. 305 in page 82.
Change information of “MODEL & DEST WRITE MODE” in page 28.
Change of MIC (V4D), PANEL and USB boards (Suf
fi
x 21).
Change pin name of IC106 in page 61.
Change pin name of IC302 and IC306 in page 62.
Change pin name of IC453 in page 63.
Change pin name of IC611 and IC614 in page 64.
Change pin name of IC1001 in page 65.
Change pin name of IC3002 and IC5001 in page 66.
Change pin name of IC3004 in page 67.
Change P/N and description of Ref. No. 252 in page 81 and 98.
Change P/N of Ref. No. 256 in page 81.
Change RC-S801/A (WW) to RC-S801/A5 (WW) in page 3, 5, 9, 20 and 38.
Delete CUSHION, AC WIRE in page 82.
Delete MANUAL, INSTRUCTION (FRENCH) (V3: E2) and MANUAL, INSTRUCTION (FRENCH,
ARABIC) (V4D: E2) in ACCESSORIES section.