MHC-GZR999D/GZR888D/GZR777D.GB.4-181-571-11(1)
GB
G
etting S
tar
ted
Positioning the
speakers
To install the satellite speakers on the
wall (MHC‑GZR999D/GZR888D only)
1
Prepare screws (not supplied) that
are suitable for the hole on the back
of each speaker. See the illustrations
below.
9 mm
more than 25 mm
5.3 mm
4 mm
Hole on the back of
the speaker
2
Fasten the screws to the wall.
The screws should protrude 5.5 mm
to 7 mm.
5.5 mm to 7 mm
3
Hang the speakers on the screws.
5.3 mm
9 mm
Hole on the back of
the speaker
Notes
Use screws that are suitable for the wall
material and strength. As a plaster board wall
is especially fragile, attach the screws securely
to a beam and fasten them to the wall. Install
the satellite speakers on a vertical and flat
wall where reinforcement is applied.
Contact a screw shop or installer regarding
the wall material or screws to be used.
Sony is not responsible for accident or
damage caused by improper installation,
insufficient wall strength or improper screw
installation, natural calamity, etc.
Summary of Contents for MHC-GZR777D
Page 1: ......
Page 3: ... GB ...
Page 11: ...11GB Guide to parts and controls MHC GZR999D Latin American models only Continued ...
Page 12: ...12GB MHC GZR777D ...