MHC-GZR999D/GZR888D/GZR777D.GB.4-181-571-11(1)
118
GB
Picture
There is no picture.
The “VIDEO/SAT” function is
selected, but there is no input signal.
Check that the system is connected
securely.
The video cord is damaged. Replace it
with a new one.
Make sure you connect the unit to the
video input jack of your TV (page 106).
Make sure you turn on the TV and
operate the TV correctly.
Make sure you select the video input
on the TV so that you can view the
pictures from the system.
Make sure you set the color system
correctly, according to your TV’s color
system (except for Latin American
models).
Set “PROGRESSIVE (COMPONENT
OUT)” to “OFF” if you connect your
TV to the COMPONENT VIDEO
OUT jacks and your TV cannot accept
progressive signal.
You have set to progressive format
but your TV cannot accept the signal
in progressive format. In this case,
connect the VIDEO OUT jack to the
TV and set to the Interlace format
(page 32).
Even if your TV is compatible with
progressive format (525p/625p)
signals, the image may be affected
when you set to progressive format. In
this case, set to interlace format (the
default setting) (page 32).
Picture noise appears.
Wipe the disc clean (page 125).
If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality.
When you play back a VIDEO CD
recorded in a different color system
from the one you set to the system, the
picture image may be distorted (except
for Latin American models) (page 64).
When you connect your TV to the
COMPONENT VIDEO OUT jacks
and play back video-based software
in progressive signal format, some
sections of the image may appear
unnatural due to the conversion
process.
Set the color system to match your TV
(except for Latin American models)
(page 31).
Summary of Contents for MHC-GZR777D
Page 1: ......
Page 3: ... GB ...
Page 11: ...11GB Guide to parts and controls MHC GZR999D Latin American models only Continued ...
Page 12: ...12GB MHC GZR777D ...
