![background image](http://html.mh-extra.com/html/sony/mhc-dp700/mhc-dp700_operating-instructions-manual_1329935008.webp)
8
To attach the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• The type of speakers supplied vary according to the
model you purchased (see “Specifications” on page
30).
• Do not place the rear speakers on top of a TV. This
may cause color distortion in the TV screen.
• For MHC-DP800AV, be sure to connect both left
and right rear speakers. Otherwise, the sound will
not be heard.
Inserting two size AA (R6)
batteries into the remote
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Notice for carrying this system
Do the following to protect the CD
mechanism.
1
Turn on the system, then press CD.
Make sure that all discs are removed
from the unit.
2
Hold down CD, then press
?/1
until
“LOCK” appears.
3
Release
?/1
first, then release CD.
4
Unplug the AC power cord.
3
Connect the center speaker.
(MHC-DP800AV only)
Connect the speaker cords to the CENTER
SPEAKER jacks.
4
Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
The plug of the FM antenna may vary according
to the model you purchased.
5
For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
6
Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press
?/1
, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
R
L
+
–
+
Extend the FM lead
antenna horizontally.
AM loop antenna
Extend the FM lead
antenna horizontally.
AM loop antenna
Jack type
B
FM75
AM
FM75
AM
COAXIAL
]
}
]
}
220V 230-240V
120V
VOLTAGE SELECTOR
Jack type
A
Insert only the stripped portion.
Black/Stripe (
#
)
Gray/Solid (
3
)
Hooking up the system (continued)