Sony MEX-XB100BT, Service Manual

Page: 24 / 68

MEX-XB100BT
24
Cautions
ˎ
It is extremely dangerous if the cord becomes
wound around the steering column or gearstick.
Be sure to keep it and other parts from interfering
with your driving operations.
ˎ
If airbags or any other shock-absorbing
equipment is in your car, contact the store where
you purchased this unit, or the car dealer, before
installation.
Note
Before attaching the double-sided tape
ʜ
, clean the
surface of the dashboard with a dry cloth.
1
To enable the wired remote control, set
[SET STR CONTROL] in [SET STEERING] to
[EXTERNAL] (page 17).
Using the wired remote control
Speaker connection
ˎ
Before connecting the speakers, turn the unit off.
ˎ
Use speakers with an impedance of 4 to 8 ohms,
and with adequate power handling capacities to
avoid damage.
Before installing, make sure the catches on both
sides of the bracket
ʓ
are bent inwards 2 mm ( 3 /
32
in). When mounting in a Japanese car, see
“Mounting the unit in a Japanese car” (page 33).
1
Position the bracket
ʓ
inside the
dashboard, then bend the claws outward
for a tight fit.
Mounting the unit in the dashboard
ʓ
182 mm (7 1 /
4
in)
53 mm (2 1 /
8
in)
Catch
To capture your voice during handsfree calling, you
need to install the microphone
ʛ
.
Installing the microphone
ʜ
ʛ
Clip (not supplied)
ʛ
.
Installation
Before installing the unit, remove the protection
collar
ͨ
and the bracket
ʓ
from the unit.
1
Pinch both edges of the protection collar
ͨ
, then pull it out.
2
Insert both release keys
ͧ
until they
click, and pull down the bracket
ʓ
, then
pull up the unit to separate.
Removing the protection collar and the
bracket
ͨ
ʓ
†
ͧ
Face the hook inwards.
.
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Note
Use an appropriate tool to replace a fuse.
Fuse replacement
Fuse (15 A)
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
TOYOTA
ͫ
to dashboard/center console
Existing parts supplied with
your car
ͫ
Bracket
Bracket
2
Mount the unit onto the bracket
ʓ
, then
attach the protection collar
ͨ
.
Notes
ˎ
If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
ˎ
Make sure the 4 catches on the protection collar
ͨ
are properly engaged in the slots of the unit.
CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The heatsink on
the left side of the unit remains hot right after
use.
ʓ
ͨ
ͩ
ͪ
NISSAN
Note
To prevent malfunction, install only with the supplied
screws
ͫ
.
ͫ
to dashboard/center console
Existing parts supplied with
your car
ͫ
Bracket
Bracket