36
EN
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the
power connection and replace the fuse. If the
fuse blows again after replacement, there may
be an internal malfunction. In such a case,
consult your nearest Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing
(OPEN)
, then
detach it and clean the connectors with a
cotton swab dipped in alcohol. Do not apply
too much force. Otherwise, the connectors may
be damaged.
N o t e s
• For safety, before cleaning the connectors, turn
off the engine and remove the key from the
ignition switch.
• Never touch the connectors directly with your
fingers or any metal device.
Fuse (10 A)
Main unit
Back of the front panel
Note on using MDs
If you have drink holders near your audio
equipment, be careful not to splash juice or
other soft drinks onto the car audio and MDs.
Sugary residues spilt on this unit or on the
MDs may contaminate the unit and MDs,
reduce the sound quality, or prevent sound
reproduction altogether.
Cleaning
Wipe the surface of the MD cartridge from
time to time with a soft dry cloth.
