11
EN
Creating a program
— MD Program Memory
You can play the tracks in any order you want
by creating and storing programs in the unit’s
memory. You can make two programs:
Program 1 and Program 2. You can select up to
12 tracks for each program. You can store the
programs in memory.
1
Press
(SHIFT)
, then press
(4)
(PLAY
MODE) for two seconds.
“P 1” indicates Program 1 is selected.
To select Program 2, press
(5)
(
n
)
repeatedly until “P 2” appears.
2
Push the SEEK/AMS control up or down
to select the track you want.
3
Press
(6)
(ENTER) momentarily.
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish selecting tracks, press
(4)
(PLAY MODE) for two seconds.
6
Press
(SHIFT)
.
Notes
•
“
*
Wait
*
” appears in the display while the unit is
reading the data.
•
“
*
Mem Full
*
” appears in the display when you
try to enter more than 12 tracks into a program.
µ
Playing the stored program
You can select:
•PGM 1 — to play Program 1.
•PGM 2 — to play Program 2.
•PGM 1+2 — to play Programs 1 and 2.
1
Press
(SHIFT)
.
2
Press
(4)
(PLAY MODE) repeatedly until
“PGM” appears.
3
Press
(5)
(
n
) repeatedly until the
desired program appears.
Program 1 playback
µ
Program 2 playback
µ
Programs 1 and 2 playback
µ
Normal playback
Program Play starts.
4
Press
(SHIFT)
.
To return to normal playback mode, select
“PGM off” in step 3 above.
Notes
• “No data” appears in the display if no track is
stored in the program.
• ”Not ready” appears in the display if a disc that
has no programed tracks is inserted.
MD Player
continue to next page
n
PLAY
TRACK
MODE
ENTER
PLAY MODE
ENTER
PLAY
TRACK
MODE
ENTER
PGM
2
PLAY MODE
PGM1
PLAY MODE
PLAY MODE
PGM1+2
PLAY MODE
